Control Panel And Oven Doors; Cleaning Table - Rangemaster professional+ fx 90 User's Manual & Installation Instructions

Table of Contents

Advertisement

Control Panel and Oven Doors

Avoid using any abrasive cleaners including cream cleaners.
For best results use liquid detergents. The control panel
and control knobs should only be cleaned using a soft cloth
wrung out in clean hot soapy water – but take care that no
surplus water seeps into the appliance. Wipe with a clean
dampened cloth then polish with a dry cloth. The oven doors
should only be cleaned with a soft cloth wrung out in clean
hot soapy water.
Removing the Oven Door Outer Panel
The outer door panel can be removed so that the inside of
the glass can be cleaned. Open the door and remove the
2 screws in the inside face (Fig.5-2). With the door closed,
remove the 3 screws in the underside of the door. Using the
handle, carefully lift the door away. Refit in reverse.
Hotplate
Part
Hob top
Ceramic/Induction hob
Griddle plate (some models only)
Warming zone (some models only) Toughened glass
Outside of Cooker
Part
Door, door surround and storage
drawer exterior
Sides and plinth
Splashback/rear grille
Control panel
Control knobs/handles & trims
Oven door glass/glass lid (some
models only)
Oven and Grill
Part
Sides, floor & roof of oven NOT
COOK & CLEAN OVEN PANELS (see
below)
Cook & Clean oven panels (some
models only)
Oven shelves, Handyrack, grill
trivet, Handygrill rack (some
models only)
Grill pan/meat tin (some models
only)
Finish
Enamel or stainless steel
Toughened glass
Non-stick surface
Finish
Enamel or paint
Stainless steel
Painted surface
Enamel or stainless steel
Paint, enamel or stainless steel
Plastic/chrome, copper or
lacquered brass
Brass
Toughened glass
Finish
Enamel
Special enamel that partly
cleans itself
Chrome
Enamel

Cleaning Table

Cleaners listed (Table 5-1) are available from supermarkets or
electrical retailers as stated.
For enamelled surfaces use a cleaner that is approved for use
on vitreous enamel.
Regular cleaning is recommended. For easier cleaning, wipe
up any spillages immediately.
Recommended Cleaning Method
Hot soapy water, soft cloth. Any stubborn stains remove gently with
a nylon scourer.
Hot soapy water; cream cleaner/scourer if necessary.
Allow to cool. Wash in hot soapy water. Do not use abrasive
cleaners/scourers. Dishwasher.
Hot soapy water, cream cleaner/scourer if necessary.
Recommended Cleaning Method
Hot soapy water, soft cloth.
Any stubborn stains, remove gently with a liquid detergent.
E-cloth (electrical retailers) or microfibre all-purpose cloth
(supermarket).
Hot soapy water, soft cloth.
Hot soapy water, soft cloth. Cream cleaner, with care, if necessary.
Warm soapy water. Do not use abrasive cleaners on lettering.
Warm soapy water, soft cloth.
Brass polish.
Hot soapy water, cream cleaner/scourer if necessary.
Recommended Cleaning Method
Any proprietary oven cleaner that is suitable for enamel.
CAUTION: CORROSIVE/CAUSTIC OVEN CLEANERS: FOLLOW
MANUFACTURER'S INSTRUCTIONS.
Do not allow contact with the oven elements.
This surface cleans itself at 200 °C and above, or the panels can be
removed and washed with hot soapy water and a nylon brush.
An oven interior cleaner that is suitable for chrome. Soap filled pad.
Dishwasher.
Hot soapy water. Soap filled pad. Dishwasher.
Table 5.1
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional+ fx 90 induction

Table of Contents