Channel Attribute - Panasonic KX-NCP500 Programming Manual

3.1.1 Main
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.

Channel Attribute

Specifies the channel property of each port to enable several sessions to be performed for one subscription
with the SIP provider.
Default
Not Used
Value Range
Basic channel: The subscriber channel that is assigned the SIP registration information.
Additional channel for SlotN (N=1–4) ChN (N=1–16): The subordinative channel that uses the same registration
information as a Basic channel for SIP sessions. Select the Slot number and the Basic channel number to
which the Additional channel belongs.
Not Used: The channel is not in use.
Note
•
The Basic channel and Additional channel can belong to different V-SIPGW16 cards.
•
When you save the data on the Main screen, for each virtual SIP gateway port that has Channel
Attribute set to Basic channel, the following items are checked for duplication: SIP Server Location
—Name, SIP Server Location—IP Address, and SIP Service Domain.
A maximum of 32 different SIP providers can be programmed.
Provider Name
Specifies the name of the SIP provider.
Default
Not stored.
Value Range
Max. 20 characters
SIP Server Location—Name
Specifies the domain name of the SIP proxy server.
Note
Specify the domain name of the outbound proxy server, if provided by the SIP provider.
Default
Not stored.
Value Range
Max. 100 characters
22 Programming Manual for Virtual SIP CO Line Card Document Version 2011-10