Stage 2: Configuring Speakers - Meridian G68 Installation Manual

2 8
C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d

Stage 2: Configuring speakers

c o n t r o l l e r
The Speakers configuration stage allows you to set up the digital
surround controller for the particular arrangement of loudspeakers
in your system.
To configure the speakers
Either:
• Press Next after resetting the product; see page 26.
Or:
• Press Wizard; see page 25.
• Press Skip to skip past the Reset settings menu.
The display shows the title screen for stage 2:
• Press Enter to proceed or Skip to go to stage 3.
The display shows the first speaker configuration option:
• Press Next or Back to step between options.
A description of each option is shown on the top line of the
display, and its current value is shown below this to the right.
Press More for help
2: Select speakers
Back Enter Skip
Number of Subwoofers:
one
Back Next óòô öõú
The options are summarised in the table on the next page.
To change an option
• Press or to step between the alternative values for the
option.
When you have stepped through all the speaker options the display
shows:
Speaker choice finished.
Back Next
Either:
• Press Next on the last option of the last speaker to proceed to
configuring sources, as described in the next section.
Or:
• Press On/Off to return to standby.
If you press On/Off before completing the configuration a warning
is displayed, giving you the option of continuing or abandoning the
configuration.