Meridian G68 Installation Manual page 25

To connect the G68ADV, G68AXV, or G68XXV to an audio/video recorder or second zone
G68ADV/AXV/XXV
COMMS ANALOGUE
S COMP
OUT
ZONE 2
ZONE 3
S-VIDEO LEAD
The G68 can copy the currently selected audio and video inputs
to two different outputs, called COPY ZONE 2 and ZONE 3, for
recording, or for controlling one or two other rooms. For example, a
G51 Receiver could be used in a second room to listen to a source
connected to the G68.
To record audio and video
• Connect the appropriate COPY/ZONE video and audio outputs to
the video and audio inputs of the VCR.
• Connect the video and audio outputs from the VCR to
appropriate inputs on the G68.
To control a second room
• Connect the ZONE 3 outputs to ANALOGUE IN 4 on the G51.
• Connect the composite ZONE 3 outputs to the TV or monitor in
ZONE 3.
• Configure the G51 for a second zone.
For more information see the Meridian Three Room Plus guide at
www.meridian-audio.com.
Video recorder
ANALOGUE IN
S-VIDEO IN
PHONO LEADS
COMMS LEAD
PHONO LEADS
PHONO LEAD
G51 Receiver Zone 3
ANALOGUE IN
TAPE OUT
A4
COMMS
MONITOR IN ZONE 3
2 1
I n s t a l l i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r