Meridian G68 Installation Manual page 22

1 8
I n s t a l l i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
Video outputs
The following table gives details of the video outputs (G68ADV, AXV, and XXV only):
Use this output
MAIN OUT
COPY ZONE 2, ZONE 3 COMPOSITE OUTPUTS
MAIN S-VIDEO OUTPUT
COPY ZONE 2, ZONE 3 S-VIDEO OUTPUTS
COMPONENT OUT
Video inputs
The following table gives details of the video inputs:
Use this input
V1 (VCR), V2 (TV), V3 (CAB), V4 (GAME)
S1 (DVD), S2 (VCR), S3 (SAT), S4 (AUX)
Y1 (DVD), Y2 (CABLE), Y3 (SAT)
The default assignment of sources to each input is shown in brackets after the input name in the above table. To assign a different input to
a source see Configuring sources , page 30.
There is no format conversion for the main outputs. However, there
is conversion from S-video to composite for the ZONE 2 and 3
composite outputs.
To connect to this
The composite video input of a TV or monitor, using a 75 coax cable with phono
connectors.
The composite video input of a video recorder or second zone inputs, using a 75 coax
cable with phono connectors.
The S-video input of a TV or monitor, using an S-video cable.
The S-video input of a video recorder, using an S-video cable.
The component video input of a TV or monitor, using a 75 coax cable with phono
connectors.
To connect to this
The composite video output of a video source, using a 75 coax cable with phono
connectors.
The S-video output of a video source, using an S-video cable.
The component video output of a video source (interlaced or HD), using a 75 coax
cable with phono connectors.