INSP
ADJ
PERIODIC SERVICE
4. When installing the spark plug, clean
the gasket surface, wipe off any grime
that may be on the surface of the plug
and screw in the spark plug to the cor-
rect torque.
Tightening torque:
25 Nm (2.5 m • kg, 18 ft • lb)
NOTE:
If a torque wrench is not available, a good
estimate of the correct torque is a further 1/4
to 1/2 turns b on finger-tightened a spark
plug.
GREASING POINTS
1. Apply:
Water resistant grease
3-14
E