GMC Savana 2016 Owner's Manual page 192

When road conditions allow cruise
control to be safely used again,
cruise control can be turned
back on.
If the brakes are applied, cruise
control disengages.
(On/Off) : Press to turn cruise
control on or off. The white indicator
comes on in the instrument cluster
when cruise control is turned on.
+RES (Resume/Accelerate) : If
there is a set speed in memory,
press briefly to resume to a
previously set speed, or press and
hold to accelerate. If cruise control
is already active, use to increase
vehicle speed.
SET (Set/Coast) : Press briefly to
set the speed and activate cruise
control, or press and hold to
decelerate. If cruise control is
already active, use to decrease
vehicle speed.
(Cancel) : Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If is on when not in use, the
SET or +RES button could get
pressed and go into cruise when not
desired. Keep off when cruise is
not being used.
1. Press to turn the cruise
system on.
2. Get up to the desired speed.
3. Press and release SET . The
desired set speed briefly
appears in the instrument
cluster.
Driving and Operating
4. Remove your foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster 0 93.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches
about 40 km/h (25 mph) or more,
briefly press +RES. The vehicle
returns to the previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold +RES until the
desired speed is reached, then
release it.
191