GMC Savana 2016 Owner's Manual page 122

2 MINUTES : The exterior lamps will
stay on for two minutes.
NO CHANGE : No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
APPROACH LIGHTING
This feature allows you to select
whether or not to have the exterior
lamps turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless
Entry (RKE) transmitter.
Press until APPROACH
LIGHTING appears on the DIC
display. Press once to access the
settings for this feature. Then
press to scroll through the
following settings:
OFF : The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.
ON (default) : If it is dark enough
outside, the exterior lamps will turn
on briefly when you unlock the
vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until
while
transmitter is pressed, or the vehicle
is no longer off. See Remote
Keyless Entry (RKE) System
Operation 0 25.
NO CHANGE : No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
CHIME VOLUME
This feature allows you to select the
volume level of the chime.
Press until CHIME VOLUME
appears on the DIC display.
Press once to access the settings
for this feature. Then press
scroll through the following settings:
NORMAL : The chime volume will
be set to a normal level.
Instruments and Controls
LOUD : The chime volume will be
set to a loud level.
NO CHANGE : No change will be
made to this feature. The current
setting will remain.
on the RKE
There is no default for chime
volume. The volume will stay at the
last known setting.
To select a setting, press
the desired setting is displayed on
the DIC.
FACTORY SETTINGS
while
This feature allows you to set all of
the customization features back to
their factory default settings.
Press
appears on the DIC display.
Press
for this feature. Then press
scroll through the following settings:
RESTORE ALL (default) : The
customization features will be set to
to
their factory default settings.
DO NOT RESTORE : The
customization features will not be
set to their factory default settings.
121
while
until FACTORY SETTINGS
once to access the settings
to