Zotac ZBOX nano User Manual page 15

4
4. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
5. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port.
6. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
7. Connecting to USB 2.0 devices
Connect USB devices like wired/wireless keyboards (varying with areas), mouse
devices and printers to the USB ports on the system rear panel.
Note: When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
5
6
7
ZOTAC ZBOX nano
15