Power And Control Panel Problems; Power Does Not Turn On; Power Does Not Turn Off; Lcd Screen Gets Dark - Epson wf-100 User Manual

User's Guide
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When multiple sheets of paper feed at once during manual 2-sided printing, remove any paper which is loaded
in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
❏ Make sure the paper size and paper type settings of the paper source are correct.
Related Information
"Environmental Specifications" on page 96
&
"Available Paper and Capacities" on page 24
&
"Paper Handling Precautions" on page 23
&
"Loading Paper in the Rear Paper Feed" on page 25
&
"Cleaning the Paper Path" on page 71
&

Power and Control Panel Problems

Power Does Not Turn On

❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.

Power Does Not Turn Off

Disconnect the AC adapter and the USB cable. Hold down the
more than seven seconds, and then release both the buttons. To prevent the print head from drying out, turn the
printer back on and turn it off by pressing the

LCD Screen Gets Dark

The printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
Power Turns Off Suddenly when the Printer Is Running on the
Battery
❏ The printer turns off when no operations have not been performed. Turn on the printer again.
❏ Check the battery level. If the battery level is low, connect the AC adapter to the printer.

Cannot Charge the Battery from a Computer

❏ Select Menu > Battery > Battery Settings on the control panel, and then enable USB Power Supply via PC.
❏ Make sure the printer is off or in sleep mode.
❏ Turn on the computer. Wake the computer if it is in hibernate or sleep mode.
Solving Problems
P
button and the
P
button.
86
y
button at the same time for