Safety Instructions For The Battery; Printer Advisories And Warnings; Advisories And Warnings For Setting Up/Using The Printer - Epson wf-100 User Manual

User's Guide
❏ Do not shake ink cartridges too vigorously and do not drop them. Also, be careful not to squeeze them or tear
their labels. Doing so may cause ink leakage.
❏ Keep ink cartridges and maintenance box out of the reach of children.

Safety Instructions for the Battery

❏ If the battery is not fully charged within the specified time, stop charging. Otherwise, the battery could become
hot, emit smoke, rupture, or catch fire.
❏ Do not place the printer in a microwave oven or a high-pressure container. Otherwise, the battery could become
hot, emit smoke, rupture, or catch fire.
❏ If the liquid leaks from the printer (or the printer gives out bad smell), let the printer leave from flammable
objects immediately. Unless do that, the electrolyte leaked from battery will catch fire and it will cause the
smoke, flame or rupture of it.
❏ If battery acid gets in your eyes, immediately rinse your eyes thoroughly with fresh water without rubbing them.
And then, see a doctor immediately. Otherwise, permanent eye damage could result.
❏ If battery acid gets on your skin, immediately rinse the affected area thoroughly with water. And then, see a
doctor immediately.
❏ Do not drop or throw the printer or subject it to strong shocks. Otherwise, the battery could leak or the
protection circuit in the battery could be damaged. As a result, the battery could become hot, emit smoke,
rupture, or catch fire.
❏ Do not use or leave the printer in a hot location (more than 80°C), such as near a fire or a heater. Otherwise, the
plastic separator could melt and the individual cells could short-circuit. As a result, the battery could become
hot, emit smoke, rupture, or catch fire.
❏ Do not use the printer if it is leaking or damaged in any way. Otherwise, the battery could become hot, emit
smoke, rupture, or catch fire.
❏ Do not leave the printer in a vehicle. Otherwise, the battery could overheat.

Printer Advisories and Warnings

Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this
manual for future reference.

Advisories and Warnings for Setting Up/Using the Printer

❏ Do not block or cover the vents and openings in the printer.
❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏ Avoid electrical outlets controlled by wall switches or automatic timers.
❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
❏ The power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place
objects on top of the power-supply cords and do not allow the AC adapter or power-supply cords to be stepped
on or run over. Be particularly careful to keep all the power-supply cords straight at the ends and the points
where they enter and leave the AC adapter.
Important Instructions
10