Tip 10-1. Inspect R TOO COLD
Check Point
Step 1
①
Disassemble the R ASSY COVER DAMPER.
R-Sensor
Damper
Step 2
①
Inspect the location fixing condition of R-
SENSOR
- TOO COLD occurs when separate or cover
the front with protection vinyl.
②
Inspect DAMPER
- Inspect Damper Closing condition when
disassemble
※ Close condition when open R door after
power restarting on CONNECTOR condition.
- Failure when it is opened
Replace INS-DAMPER.
Inspect COVER DAMPER
Damper
- 48/47 -