Recording On A Tape Manually; Manual Recording - Sony CMT-HP8V Operating Instructions Manual

Recording on a tape
manually

— Manual Recording

You can record just the portions you like from a
CD or radio program on a tape.
You can also record from connected
components (see "Hooking up optional
components" on page 28).
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press FUNCTION repeatedly (or TAPE
A/B on the remote) until "TAPE"
appears.
3
Press PLAY MODE repeatedly to select
"g" to record on one side or "h" to
record on both sides.
4
Press FUNCTION repeatedly (or CD,
TUNER BAND or GAME (MD) on the
remote) to select the desired source to
record.
• CD: To record from this system's CD
player.
• TUNER: To record from this system's
tuner.
• MD: To record from the optional
component connected to the MD IN
jacks.
5
Press REC PAUSE/START.
The tape deck stands by for recording.
"REC" flashes.
When you want to record on the reverse
side, press TAPE nN (or N on the
remote).
6
Press REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• If TAPE is selected in step 4, silence is recorded.
Tip
For recording from the tuner:
If noise is heard while recording from the tuner, move
the respective antenna to reduce the noise.
GB
19