Lighting - Mercedes-Benz 2010 E-Class Coupe Operator's Manual

X
Press button a to change the setting.
Depending on the previous setting the
Display Unit Speed-/Odometer: will be
set to miles or km.
The selected display unit is valid for:
Odometer and trip odometer
R
Trip computer
R
Digital speedometer in the trip menu
R
Cruise control
R
Navigation displays
R
Permanent display
You can use the Permanent Display:
function to choose to display either the
outside temperature or the speed in
kilometers (USA) or miles (Canada)
permanently.
X
Press button = or ; to select the
Sett. menu.
X
Press button : or 9 to select the
Instr. Cluster submenu.
X
Press button a.
X
Press button : or 9 to select the
Permanent Display: function.
The current setting is shown.
X
Press button a to change the current
status.
Depending on the previous status, the
Permanent Display: will be switched
between Outside temperature or
Speedometer (km/h) (USA)/
Speedometer (miles) (Canada).
Lights submenu
Access the Lights submenu via the Sett.
menu. Use the submenu to change the lamp
and lighting settings on your vehicle.
The following functions are available:
Switching daytime running lamp mode on
R
or off (USA only) ( Y
Switching Adaptive Highbeam Assist on or
R
off ( Y page 124)
Switching locator lighting function on or off
R
( Y page 124)
Switching interior lighting delayed shut-off
R
on or off ( Y page 125)
Switching daytime running lamp mode on
or off (USA only)
X
Press button = or ; to select the
Sett. menu.
X
Press button : or 9 to select the
Lights submenu.
X
Press button a.
X
Press button : or 9 to select the
Daytime Running Lamps: function.
The current setting Enabled or Disabled
is shown.
X
Press button a to change the current
status.
Depending on the previous status, the
Daytime Running Lamps: mode will be
Enabled or Disabled.
With Daytime Running Lamps mode
enabled and the exterior lamp switch at
position $ or c, the daytime running
lamps are switched on when the engine is
running.
Control system
page 123)
Z
123