Control System; Multifunction Steering Wheel; Fuel Gauge; Buttons - Mercedes-Benz 2010 E-Class Coupe Operator's Manual

Control system

112

Fuel gauge

The fuel gauge is on the left-hand side of the
instrument cluster (
level has fallen below the reserve mark, the
yellow fuel tank reserve warning lamp 8
for the fuel reserve comes on.
Control system
Introduction
The control system is activated as soon as the
starter switch is in position 2.
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to call up statistical
data on your vehicle, and much more.
G
Warning!
A driver's attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
The control system relays information to the
multifunction display.

Multifunction steering wheel

The displays in the multifunction display and
the settings in the control system are
controlled by using the buttons on the
multifunction steering wheel.
9 Function only available in telephone menu.
Function only available in vehicles with Voice Control System.
10
Y page 28). Once the fuel
: Multifunction display
; Press button
~ to end a call
to reject an incoming call
6 to answer a call
9
to dial
9
to redial
8 to mute
Press button
to set the volume
W
X
= Press button
? to activate the Voice Control
10
System
? Press button briefly
% to cancel the Voice Control
10
System
to go back
to confirm messages
Press and hold button
% to select the standard display