Controls in detail
Lighting
Locator lighting and night security
illumination
Locator lighting and night security
illumination are described in the "Control
system" section, see "Setting locator
lighting" (
Y
page 156) and "Setting night
security illumination (Headlamps delayed
shut-off feature)" (
Y
page 157).
Combination switch
High beam
1
High-beam flasher
2
118
High beam
X
Turn the exterior lamp switch to position
(
Y
page 115).
B
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
in the instrument cluster comes on.
A
X
Switching off: Pull the combination switch
in direction of arrow
to its original
2
position.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Turn signals
Turn signals, right
1
Turn signals, left
2
X
Press the combination switch in direction
of arrow
or 2.
1
The corresponding turn signal indicator
lamp
or
in the instrument
L
K
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.