Night View Assist; Display - Mercedes-Benz 2009 CL-Class Operator's Manual

Display messages
Vehicle Rising
Please Wait
Briefly

Night View Assist

Inoperative
Night View Assist
Currently
Unavailable
Night View Assist
Lights Must Be Set
to AUTO or ON
Night View Assist
Not In Reverse Gear
Vehicle status messages in the multifunction display
Possible cause/consequence
Vehicles with AIRMATIC:
The vehicle level is too low.
Night View Assist is malfunctioning.
The temperature of the camera is too high
( Y page 380).
You have tried to switch on Night View
Assist, but the exterior lamp switch is not
set to * or B.
You have tried to switch on Night View
Assist while the automatic transmission
was in reverse gear R.
Possible solution
X
Wait until the message disappears from the
multifunction display.
X
Contact an authorized Mercedes-Benz Center
as soon as possible.
X Wait until the message Night View Assist
Available Again appears.
In addition you can:
X
Swing the camera cover down (
X
Adjust the air distribution of the climate control
so that air flows upward ( Y
X
Turn the exterior lamp switch to * or
B ( Y page 316).
X
Shift the automatic transmission to park
position P, neutral position N or drive position
D ( Y page 335).
Practical hints
Y page 466).
page 224).
Z
507