Seats; Adjusting - Mercedes-Benz 2009 CL-Class Operator's Manual

Controls in detail

Seats

of the head restraint supports the back of
the head at eye level. This will reduce the
potential for injury to the head and neck in
the event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
Seat adjustment
You can adjust the lumbar support,
multicontour seats for driver and front
passenger, as well as drive-dynamic
multicontour seats using COMAND
Y
( page 227).
! When moving the seats, make sure there
are no items in the footwell or behind the
seats. Otherwise, you could damage the
seats.
304
Power seats
Head restraint height
1
Seat height
2
Seat cushion tilt
3
Seat cushion depth
4
Seat fore and aft adjustment
5
Seat backrest tilt
6
®
i If PRE-SAFE has been activated, the
front passenger's seat will be moved to a
more favorable seat position.
i The memory function ( Y page 314) lets
you store the settings for the seat position
together with the settings for the steering
wheel and the exterior rear view mirrors.
X
Seat height: Press the switch up or down
in direction of arrow 2.
X
Seat cushion tilt: Press the switch up or
down in direction of arrow
3
upper legs are lightly supported.
X
Seat cushion depth: Press the switch
forward or backward in direction of arrow
until your legs are supported
4
comfortably.
X
Seat fore and aft: Press the switch
forward or backward in direction of arrow
5.
i
When moving the seat fore or aft, the head
restraints may readjust automatically.
X
Seat backrest tilt: Press the switch
forward or backward in direction of arrow
6.
X
Head restraint height: Press the switch
up or down in direction of arrow 1.
Adjusting front passenger seat from
driver's seat
G Warning!
When adjusting the front passenger seat,
make sure the seat, if occupied, is as far
from the front passenger front air bag as
possible.
until your