Controls in detail
Memory function*
Storing positions into memory
Adjust the seat, on the driver's side
also the steering wheel and exterior
rear view mirrors, to the desired
positions ( page 39).
Press memory button M.
Release memory button M and press a
memory position switch 2 within
3 seconds.
All settings are stored to the selected
position.
108
Recalling positions from memory
!
Do not operate the power seats using the
memory position switches if the seat backrest is
in an excessively reclined position. Doing so
could cause damage to the seats.
Press and hold desired memory
position switch 2 until the seat, on
the driver's side also the steering
wheel and exterior rear view mirrors,
have completely moved to the stored
positions.
i
Releasing the memory position switches
immediately stops movement to the stored
positions.