Canon Pixma MP530 User Manual page 179
Hide thumbs
Also See for Pixma MP530:
- Quick start manual (200 pages) ,
- User manual (176 pages) ,
- Service manual (91 pages)
Table of Contents
Advertisement
3
Install the ink tanks
4
Align the Print Head
You want to receive voice messages on
your answering machine, and receive
faxes automatically:
---+
ANS.MACHINE MODE
You receive mainly voice calls and
sometimes faxes, and you want to receive
faxes manually:
---+
MANUAL MODE
You can load paper in both the Auto Sheet Feeder
and Cassette.
You want to switch faxes and voice calls
automatically:
---+
FAXITEL AUTO SW
You have subscribed to a Distinctive Ring
Pattern Detection (DRPD) service with your
telephone company:
---+
DRPD
For details about the receive mode
setting, refer to "Receiving Faxes" in the
User's Guide.
If you are unsure of your telephone line
type, contact your telephone company.
To send a fax, you need to set the
telephone line type setting properly on
the machine.
You have a dedicated telephone line for
fax use only:
---+
FAX ONLY MODE
If you are connecting the machine to a computer for
use, see the back side of this sheet for instructions on
installing the software.
o
Pull out the Cassette from the bottom
of the machine.
For fax users
Hardware setup and Print Head
alignment is complete.
Cassette Loading
Paper Support
Extension
Paper Guide
Print Side
Cover Guide
Paper Guide
•
Ensure that the message requesting
head alignment is displayed on the
LCD, select <YES> using [
<lllIIII]
or
[~
]
and press [OK].
8
Load a few sheets of letter- or A4-size
paper into the Auto Sheet Feeder,
align the paper with the right side of
the Cover Guide, then slide the Paper
Guide toward the left edge of the
paper.
o
Open the Paper Support, then pull out
the extension. Pinch the Paper Guide
and slide it to the left.
ink port
Protective Cap
Electrical Contacts
Do not press!
If the orange-colored protective film is
not removed completely, problems with
printing may occur.
Refer to the color guide on
the Print Head Lock Lever.
A
IMPORTANT
• Do not touch the electrical contacts.
• Do not touch the ink port.
•
Insert the ink tank into the right-hand
slot.
e
Press the
8
mark on the ink tank until
it clicks into place and then its lamp
lights red.
8
Twist off and discard the orange
protective cap located on the bottom
of the ink tank.
o
Peel back the orange tab completely
and remove the plastic wrapper from
the ink tank.
o
Close the Inner Cover and the
Scanning Unit (Printer Cover).
A
IMPORTANT
For safety, always firmly grip the areas illustrated
when closing the Scanning Unit (Printer Cover).
The pattern is printed. And Print Head is aligned
automatically.
~
• The pattern is printed in black and blue.
• Print Head alignment will take several minutes to
complete. Do not start another operation here.
• When automatic Print Head alignment cannot be executed
cOtTectly, the Inessage <HEAD ALIGNMENT ERROR>
is displayed on the LCD. Refer to "An EtTor Message is
Displayed on the LCD" in the User
s
Guide.
8
Load the stack of paper into the
Cassette with the print side face
down. Pinch the Paper Guide and
align it to the stack.
Paper--~'
Guide
Hide quick links:
Advertisement
Table of Contents
