Back Of Paper Is Smudged/Paper Does Not - Canon Pixma MP530 User Manual

Check the size of the print data. For Windows XP and Windows 2000, if the
size of the data is too large, part of it may be lost. When the spool format is
The size of the print data is too large. EMF, follow the procedure below.
1. Open the printer properties dialog box.
2. On the [Page Setup] tab, click [Print Options].
3. Select the [Reduce spool data size] check box, and click [OK].
W
Note
• When [Reduce spool data size] is set, the print quality may be
degraded.
• This is useful when a part of straight lines or data is lost for page layout
printing.
Performing automatic duplex
printing
• When Copying
Select [Use reduced printing] in the printer driver. It may solve the
problem.
1. Open the printer properties dialog box.
2. Click [Print Area Setup] in the [Page Setup] tab and select [Use reduced
printing].
1. In the [Print] dialog box, select [Duplex Printing & Margin] from the pop-
up menu.
2. Select [Automatic Duplex Printing], and select [Use reduced printing] in
Print Area.
Cause Action
The document is not loaded Check that the document is loaded correctly on the Platen Glass or in the
correctly. ADF.
See "Loading Documents" on page 19.
The quality (Print quality) displayed Set the image quality suitable for the document.
on the LCD is not suitable for the
See "Copying" on page 40.
document.
. The document is not loaded with the When loading the document on the Platen Glass, the side to be copied
side to be copied face down. should be face down.
When loading in the ADF, the side to be copied should be face up.
The document or photograph set on Image quality may be poor if you copy a printed document or photograph.
the Platen Glass or in the ADF was
Instead, reprint the photograph directly from the digital camera, or the
i
printed from your machine. document from your computer.
The Platen Glass or inner side of the Clean the Platen Glass or inner side of the Document Cover, or the ADF.
Document Cover is dirty.
See "Cleaning the Platen Glass and Document Cover" on page 107.
Back of Paper is Smudged/Paper Does Not Feed
Properly/Printed Surface is Scratched
122 Troubleshooting Chapter 9