Starting route guidance to an entry
Search for an address book entry
( page 217).
Display the details of an entry and high-
light the address data field
( page 219).
Select "Options"
"Navigate".
or
Press n.
i
Pressing n only functions if one of the ad-
dress data fields contains data.
Further operation depends on whether the
address data is complete and matches the
digital map data of the navigation system.
It does not match, for example, if it is not
spelled in the same way as the destination
entry.
Address data is complete and matches
digital map
If "Navigate" is selected, the navigation
system starts the route calculation.
Address data is incomplete or does not
match digital map
i
For the route calculation, the navigation sys-
tem requires the correct spellings of the state
(province), the town/city or zip code, the street
and under some circumstances, the house num-
ber. The town/city and street must be spelled in
the same manner as the destination entry.
The state (province) can be spelled as an entire
name or as an abbreviation.
Examples:
Florida or FL
Colorado or CO
Alberta or AB
Ontario or ON
If "Navigate" is selected, a message ap-
pears indicating that the address is incom-
plete.
Closing message: Select "OK".
Depending on which data is missing or
cannot be found on the digital map, you
must now either:
select a state (province)
Control systems
COMAND address book
select a county
or enter a town/city
or enter a street
or enter a house number
Selecting a state (province):
Select desired state (province) from
the list.
Selecting a county: Select desired
county from the list.
Entering a town: Proceed as de-
scribed for destination entry in the "En-
tering a town or city" section
( page 168).
Entering a street: Proceed as de-
scribed for destination entry in the "En-
tering a street" section ( page 171).
Entering a house number: Proceed
as described for destination entry in
the "Entering a house number" section
( page 175).
223