Control systems
COMAND telephone*
Switching telephone on or off
Switching on: Insert mobile phone
into cradle when COMAND is switched
on.
or
Switch on the mobile phone
(see mobile phone operating instruc-
tions).
Switching off: Select "Telephone"
"Telephone"
"Telephone OFF".
or
Switch off mobile phone (see mobile
phone operating instructions).
122
Activating telephone mode
Select "Telephone"
"Telephone"
"Telephone".
or
Press s on telephone keypad.
Telephone keypad
1 Telephone keypad
2 Folding cover
With the telephone keypad you can:
Enter and clear numbers and special
characters
Reject, accept, connect and end calls
Entering characters: Select "Tele-
phone"
"Telephone"
Fold up cover 2.
Enter characters using A - #.
i
You can enter the * character by
pressing > once. Pressing this button again
within 1.5 seconds enters the + character.
Deleting individual characters:
Press *.
Deleting an entire word or number:
Press and hold * until the word or
number is deleted.
"Telephone".