Table of Contents
Advertisement
1 Vehicle tool kit
Wheel wrench
Jack
2 Arrow
3 Minispare wheel, Wheel bolts for
Minispare wheel
4 Vehicle tool kit storage well casing
Remove vehicle tool kit storage well
casing 4.
Remove Minispare wheel 3.
Storing the Minispare wheel
Place Minispare wheel 3 in wheel
well.
Place vehicle tool kit storage well
casing 4 over the Minispare wheel.
Make sure arrow 2 on vehicle tool kit
storage well casing 4 points in the
direction of travel.
Place storage well casing ( page 414)
over the vehicle tool kit storage well
casing 4 and turn the retaining screw
( page 414) clockwise as far it will go
to secure the Minispare wheel.
i
Arrow 2 on vehicle tool kit storage
well casing 4 must point in the
direction of travel. Otherwise you
cannot place the storage well casing
( page 414) on top and secure the
Minispare wheel with the retaining
screw ( page 414).
Practical hints
Where will I find...?
Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
!
To prevent damage, always disengage
trunk floor handle from upper edge of
trunk and lower trunk floor before
closing the trunk.
Warning!
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted.
The Minispare wheel should only be used
temporarily, and should be replaced with a
regular road wheel as quickly as possible.
®
Do not switch off the ESP
when a Minis-
pare wheel is mounted.
G
417
Advertisement
Table of Contents
