Mercedes-Benz 2006 CLK 350 Operator's Manual page 300

i
If the indicator lamp 1 flashes rapidly
for about 2 seconds and then turns to a
constant light, continue with
programming steps 8 through 12 as
your garage door opener may be
equipped with the "rolling code"
feature.
Step 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the "Programming" portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate "training" button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
"training" button may also be referred
to as "learn"or "smart" button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator's manual.
Controls in detail
Useful features
Step 9:
Press the "training" button on the ga-
rage door opener motor head unit.
The "training light" is activated.
You have 30 seconds to initiate the
following two steps.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or 4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training
process.
299