Table of Contents
Advertisement
Controls in detail
Audio system
Selecting a station
The following options are available for se-
lecting a station:
Direct frequency input ( page 218)
Manual tuning ( page 218)
Automatic seek tuning ( page 219)
Scan search ( page 219)
Station memory ( page 219)
Automatic station memory (Autostore)
( page 220)
The station search proceeds in the follow-
ing frequency increments:
200 kHz in FM range
10 kHz in AM range
218
Direct frequency input
Select desired waveband.
Press * button.
Enter desired frequency with buttons
1 to R.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within
four seconds, the radio will return to
the last station tuned.
Manual tuning
Select desired waveband.
Press S or T button for approx.
three seconds.
Press button repeatedly until desired
frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 mHz. During man-
ual tuning, the radio is muted.
Advertisement
Table of Contents
