Mercedes-Benz 2005 M-Class Operator's Manual page 99

Head restraint tilt
Manually adjust the angle of the head
restraint.
Push or pull on the upper edge of the
head restraint cushion.
For more information on seats, see the
"Getting started" section ( page 35).
Removing and installing rear seat head
restraints
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
Controls in detail
G
1 Release button
Removing rear seat head restraints
Pull head restraint to its highest
position.
Push release button 1 and pull out
head restraint.
i
For a better view toward the rear, you
can store the rear center head restraint
underneath the rear seat ( page 98).
Seats
97