Mercedes-Benz 2005 M-Class Operator's Manual page 267

1 Vehicle jack
2 Wheel bolt wrench
3 Screwdriver
4 Interchangeable slot
Screwdriver 3 is placed inside the wheel-
bolt wrench handle.
Vehicle jack
Please also observe the safety guidelines
in the "Flat tire" section ( page 284)
when using the jack.
Warning!
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface.
Practical hints
Where will I find ...?
Make sure that the jack arm is fully seated
in the jack take-up bracket. Always lower
the vehicle onto sufficient capacity jack-
stands before working under the vehicle.
G
Vehicle with CD-changer*
To access the vehicle tool kit, swing the
CD-changer out of the panel.
1 Screw
2 CD-changer
Turn screw 1 counterclockwise.
Swing the CD-changer 2 out of the
panel.
265