Nav* Menu; Vehicle Status Message Memory Menu - Mercedes-Benz 2005 C 240 Operator's Manual

Controls in detail
Control system

NAV* menu

The NAV menu contains the functions
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message appears in the
NAV
multifunction display.
If the navigation system is switched off,
the message NAV OFF appears in the
multifunction display.
If the navigation system is on, different
messages, depending on the current
state of the navigation system, appear
in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
128

Vehicle status message memory menu

Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the mul-
tifunction display and are based on condi-
tions or system status the vehicle's system
has recorded.
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( page 301).
Press button è or ÿ repeatedly
until the vehicle status message
memory appears in the multifunction
display.
G