General Guidelines - Elation Color Tone 50 User Instruction

Color Tone 50™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in
theatres, etc. Do not attempt operation or installation without a proper knowledge on how to
so.
This fixture was designed for indoor use only, use of this fixture outside will void
manufactures warranty.
Consistent operational breaks may ensure that the fixture will function properly for many
years to come.
Do not shake the fixture around. Avoid brute force when installing or operating the device.
While choosing an installation location, please be sure that the fixture will not be exposed to
extreme heat, moisture or dust. The minimum distance between the fixture and a wall or flat
surface should be at least .5 meter (about 1.5ft).
Always install the fixture with an appropriate safety cable. When installing the fixture in a
suspended environment always be to use mounting hardware no less than M10 x 25 mm,
also be sure the hardware is insert in the pre-arranged screw holes in the base of the fixture.
Do not attempt to operate this fixture until you have familiarized yourself with its functions.
Do not permit operation by persons not qualified for operating this type of theatrical fixture;
most damages are the result of operation by nonprofessionals.
Please use the original packaging to transport the fixture in for service.
If the device has been exposed to temperature changes due to environmental changes, do
not switch it on immediately. The arising internal condensation could damage the device.
Leave the device switched off until it has reached room temperature.
If the external flexible cable or cord of this fixture is damaged, it shall be exclusively replaced
by the manufacturer or an authorized service agent or a similar qualified person in order to
avoid a hazard.
©Elation Professional® 8 Color Tone 50™