General Guidelines - Elation Event Brick W System Manual

Event Brick System™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in
theatres, etc. Do not attempt operation or installation without a proper knowledge on how to
so.
This fixture was designed for indoor use only, use of this product outdoors will void all
warranties written or implied.
Although this fixture has not duty cycle, consistent operational breaks will ensure that the
fixture will function properly for many years to come.
Do not shake the fixture around. Avoid brute force when installing or operating the device.
When choosing an installation location, please be sure the fixture will not be exposed to
extreme heat, moisture, or dust. The minimum distance between the fixture and a wall or flat
surface should be at least .5 meter (about 1.5ft).
Always install the fixture with an appropriate safety cable. When installing the fixture in a
suspended environment always be to use mounting hardware no less than M10 x 25 mm,
also be sure the hardware is insert in the pre-arranged mounting holes in the bracket (see
page 17).
Do not attempt to operate this fixture until you have familiarized yourself with its functions.
Do not permit operation by persons not qualified for operating this type of theatrical fixture;
most damages are the result of operations by persons unfamiliar with this type of product.
©Elation Professional® 9 Event Brick System™