Sony MZ-NE410CK Service Manual page 21

• Adjustment Method of VREC_LOW (X2 speed)
(item number: 751)
Set LCD display
751
A D * *
** : Adjusted value
1. Connect a digital voltmeter to the TP1620 (VREC) on the
[VOL +]
MAIN board, and adjust
key (voltage down) so that the voltage becomes 1.20 ± 0.02V.
MAIN board
TP1620 (VREC)
BATT – (GND)
2. Press the ENT/u key to write the adjusted value.
Adju s tment and Connection Location: MAIN board
• Adjustment Method of VREC_MIDDLE (X4 speed)
(item number: 752)
Set LCD display
752
A D * *
** : Adjusted value
1. Connect a digital voltmeter to the TP1620 (VREC) on the
[VOL +]
MAIN board, and adjust
key (voltage down) so that the voltage becomes 1.20 ± 0.02V.
MAIN board
TP1620 (VREC)
BATT – (GND)
2. Press the key to write the adjusted value.
ENT/u
Adju s tment and Connection Location: MAIN board
[VOL --]
key (voltage up) or
digital
voltmeter
(see page 22)
[VOL --]
key (voltage up) or
digital
voltmeter
(see page 22)
• Adjustment Method of VREC_HIGH (HEAD MOTOR)
(item number: 753)
Set LCD display
753
A D * *
** : Adjusted value
1. Connect a digital voltmeter to the TP1620 (VREC) on the
[VOL +]
MAIN board, and adjust
key (voltage down) so that the voltage becomes between 1.65V
and 1.75V.
MAIN board
TP1620 (VREC)
BATT – (GND)
2. Press the key to write the adjusted value.
ENT/u
Adju s tment and Connection Location: MAIN board
MZ-NE410/NE410CK
[VOL --]
key (voltage up) or
digital
voltmeter
(see page 22)
21