Table of Contents
Advertisement
Controls in detail
Control system
Press button k or j .
The stored messages will now be dis-
played in the order in which the mal-
functions have occurred. See the
"Practical hints" section for malfunc-
tion and warning messages
( page 296).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see high priority messag-
es in the malfunction display
( page 296).
146
Settings menu
In the
menu there are two func-
SETTINGS
tions:
The function
TO RESET: R BUTTON FOR
, with which you can reset all
3 SEC.
settings to the original factory settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the
menu appears in the
SETTINGS
display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
Press the reset button J in the instru-
ment cluster for approximately three
seconds.
In the display you will see the request
to press the reset button J again to
confirm.
Press the reset button J again.
The functions of all the submenus will
reset to factory settings.
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button J a sec-
ond time.
Due to safety reasons, resetting all of
the settings while driving will not reset
all of the values in the
LIGHTING
menu.
VEHICLE
or the
Advertisement
Table of Contents
