Mercedes-Benz 2003 S 430 Operator's Manual page 144

Controls in detail
Control system
i
The display will flash until
AFTER START
a distance of approximately 1 mile (1.6
km) has been covered or two minutes
have elapsed since the engine was re-
started. During this period, you can in-
corporate the values for the previous
journey by pressing J in the instru-
ment cluster.
If button J is not pressed, the AFTER
START values are set to 0.
144
Fuel consumption since last reset
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see this message in the dis-
play: .
AFTER RESET
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last re-
set
4 Average speed since last reset
Resetting fuel consumption statistics
Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
Press and hold the reset button J in
the instrument cluster ( page 22) un-
til the value is reset to .
0