Table of Contents
Advertisement
Controls in detail
Control system
Which messages will appear in the display
field depends on whether your telephone is
switched on or off:
If the telephone is off, the message in
the multifunction display is:
If the telephone is on:
The telephone will then search for a
network. During this time the display
reads
.
NO SERVICE
As soon as the telephone has found a
network,
is indicated in the dis-
READY
play.
The standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
140
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the display you will then see the message:
.
TEL OFF
Press button í .
You have answered the call. In the dis-
play you see the duration of the call po-
sitioned above the number.
i
If you do not wish to accept a call,
press button ì .
Ending a call
Press button ì .
You have ended the call. In the display
you will again see the standby mes-
sage.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press button ÿ or è repeatedly
until you see the
menu in the dis-
TEL
play.
Press button j or k .
The control system reads the phone
book which is stored in the telephone.
This may take up to 30 seconds. In the
display you will see the message
.
PLEASE WAIT!
When the message
PLEASE WAIT!
appears, the phone book has been
loaded.
dis-
Advertisement
Table of Contents
