Mercedes-Benz 2003 S 430 Operator's Manual page 106

Controls in detail
Seats
Installing front head restraints:
Press switch 1 upwards and hold for
about five seconds.
Push the head restraint down until it
engages.
Adjust head restraint to desired posi-
tion ( page 35).
Rear seat head restraints
Warning!
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
i
You can adjust the angle manually by
pulling or pushing the head restraints
by hand.
106
Folding rear head restraints back
Make sure the ignition is switched on.
G
All the lamps in the instrument cluster
should light up.
Press switch 1.
The rear head restraints will fold back-
ward.
Placing rear head restraints upright
Pull the rear head restraint forward un-
til it locks into position.
!
Make sure that the head restraints en-
gage when adjusting them manually.
Otherwise, their protective function
cannot be ensured.
Rear head restraint tilt
The read head restraint angle can be ad-
justed manually.