Sony RCP-920 Operation Manual page 34

6 Camera/CCU function ON/OFF buttons
Various functions of the video camera or the CCU/HDCU
can be turned ON and OFF from this panel.
The following switching functions are assigned to seven of
the buttons at the factory and the rightmost button is
reserved for future use.
Press and light up these buttons to turn ON the respective
functions.
Press again so that the buttons go dark to turn OFF the
functions.
5600K: 5600K electric color temperature conversion
function
AUTO KNEE: Auto knee function. When this button is lit
(ON), the knee point is automatically adjusted
according to the light content of the picture.
SKIN DETAIL: Skin tone detail function
DETAIL GATE: Skin tone detail gate function. When
this button is lit (ON), the adjustment range of the skin
tone detail is displayed in white on the monitor screen.
SAT: Saturation function
BLACK GAMMA: Black gamma function
CHARACTER: Self-diagnostic display function.
When this button is lit (ON), the contents of the self-
diagnosis of the CCU/HDCU is displayed on a monitor
connected to the CHARACTER OUTPUT connector of
the CCU/HDCU.
The contents are also mixed to the video signal to be
output from the PIX1 OUTPUT connector.
Each time you press this button, the display changes as
follows:
The contents of the self-diagnosis may be displayed when
required even if this button is not lit.
34
Location and Function of Parts
7 Paint control block
a LCD panel
Shows adjustment items and other information.
b CLEAR button
Press and hold for more than 1 second to clear the
manually adjusted settings of the selected items and
resume the standard settings (which can be defined by the
user).
c ENTER button
Press to select or confirm menu and adjustment items, etc.
d Paint controls (rotary encoders)
Adjust the value of the selected paint adjustment item.
e MENU UP/DOWN button
Used for moving between menu pages. Press the v button
to go back one page and the V button to go to the next
page.
8 Scene file control block
a SCENE FILES buttons
While the STORE button is flashing: When you press
one of these buttons, the current setting data is stored
as a file of the corresponding number.
While the STORE button is out: The stored data can be
retrieved by pressing and lighting up the button of the
desired number. Press the lit button to turn it dark and
resume the previous status.