Sony RCP-920 Operation Manual page 28

Camera SLS/ECS/shutter function control
The SLS (Slow Shutter), ECS (Extended Clear Scan), and
electronic shutter functions of the camera can be turned
ON/OFF from this panel. The ECS frequency and shutter
speed are also selected using the buttons on the panel.
Dedicated cable or Ethernet connection
The connection between the remote control panel and the
camera control unit is established by a single dedicated
cable (CCA-5) that reliably sends and receives all
necessary signals and also provides power for the panel.
Alternatively, a connection via Ethernet cable is also
possible.
Support for parallel operation with other control
panels
Video cameras can be concurrently controlled from this
panel and other controller, such as the MSU-900/950
Master Setup Unit.
Four units fit in 19-inch rack
Up to four units of this control panel can be mounted in
line on a 19-inch EIA standard rack.
28
Overview