Rear seat head restraints
Removing rear head restraints
Pull head restraint to its highest posi-
tion.
Push button 1 and pull out head re-
straint.
Installing rear head restraints
Insert head restraint and push it down
until it engages.
Push button 1 and adjust head re-
straint to desired position.
Warning!
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
Controls in detail
Heated seats*
G
The switches are located in the center con-
sole.
1 Normal heating
2 Rapid heating
Make sure that the ignition is switched
on.
All the lamps in the instrument cluster
light up.
Seats
91