Parking and standing lamp bulb
Switch off the lights.
Open the hood ( page 226).
Turn headlamp cover 2 to the left and
remove.
Pull out the bulb socket with the bulb.
Pull the bulb out of the bulb socket.
Insert a new bulb in the socket.
Reinstall the bulb socket.
Replace headlamp cover 2 and turn to
the right until it engages.
i
If the inside of the headlamps is fogged
up, switch the lights on for a sufficient
amount of time.
Bi-Xenon* headlamps
Warning!
Do not remove the cover 3 for the Bi-Xenon
headlamp. Because of high voltage in Bi-Xe-
non lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam head-
lamp
3 Headlamp cover for Bi-Xenon head-
lamp
G
4 High beam bulb
5 Bulb holder
6 Parking and standing lamp
High beam bulb
Switch off the lights.
Open the hood ( page 226).
Turn headlamp cover 2 to the left and
remove.
Practical hints
Replacing bulbs
283