Where Will I Find - Mercedes-Benz 2003 C-Class Coupe Operator's Manual

Warning!
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Make sure that the jack
arm is fully seated in the jack take-up brack-
et. Always lower the vehicle onto sufficient
capacity jack stands before working under
the vehicle.
Spare wheel bolts
G
1 Wheel bolt for light alloy rims
2 Wheel bolt for light alloy spare wheel
1
rim size 4 / B x15 H2
2
!
Wheel bolts 2 must be used when
mounting spare wheel rim
1
size 4 / B x15 H2 ( page 313).
2
The use of any wheel bolts other than
wheel bolts 2 for spare wheel rim
1
size 4 / B x15 H2 can cause physical
2
damage to the vehicle.
Practical hints

Where will I find ...?

Warning!
Be sure to use the original length wheel
bolts when remounting the original wheel af-
ter it has been repaired.
Refer to "Technical data" section
( page 313) for model and spare wheel
rim size information.
G
273