Combination Switch; Hazard Warning Flasher - Mercedes-Benz 2003 C 240 4MATIC Operator's Manual

Controls in detail
Lighting

Combination switch

The combination switch is located on the
left side of the steering column.
1 High beam
2 High beam flasher
Switching on high beams
Turn exterior lamp switch to
position B or to U
( page 101).
Push the combination switch in
direction 1.
The high beam symbol is illuminated on
the instrument cluster.
104
High beam flasher
Pull the combination switch briefly in
direction 2.

Hazard warning flasher

The hazard warning flasher can be activat-
ed with the ignition switched on or off. It is
activated automatically when an airbag is
deployed.
The switch is located on the center con-
sole.
1 Hazard warning flasher switch
Switching on the hazard warning
flasher
Press the hazard warning flasher
switch.
All turn signals will blink.
i
With the hazard warning flasher acti-
vated and the combination switch set
for either left or right turn, only the re-
spective left or right turn signals will
operate when the key in the starter
switch is in position 1 or 2.
Switching off the hazard warning
flasher
Press hazard warning flasher switch
again.