Bypass Transport Option - Xerox DocuPrint 96 IPS System Overview Manual

Bypass transport option

XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
The programmable bypass transport moves paper from the stacker
to a third-party finishing device (for example, a stitcher). When
installed, the bypass transport is attached to the last feeder stacker
module.
Note: With the bypass transport installed, the 4635 and 180 IPS
can support up to three feeder/stacker modules, including the
inverter feeder/stacker. The 96 IPS can have no more than two
feeder/stackers.
Figure 1-3. 96/4635/180 IPS with bypass transport
1 Bypass transport paper output location
2 Input enablement device paper input location
The illustration above shows a 96/4635/180 IPS with two feeder/
stacker modules and a bypass transport. For complete information
on printer configurations available with the bypass transport, refer to
the chapter "Printers."
SYSTEM OVERVIEW
1-9