Sample Tray; Attention Light; Purge Tray - Xerox DocuPrint 96 IPS System Overview Manual

PRINTERS

Sample tray

Attention light

Purge tray

4-6
ACT icon — Appears when a maintenance task requiring an
ACT trained operator must be done. If you have successfully
completed ACT, either check the Printer Controller for
messages concerning the maintenance task or touch the
Guarded Tools icon to display the Guarded Tools screen. If you
are not an ACT trained operator, notify your lead operator or an
ACT trained operator at your site.
12. Message area
The message area is used as follows:
•
Lines 1 and 2. These lines display the current status of the
printer; for example, READY.
•
Line 3. This line displays messages concerning masked
conditions, such as low dry ink. These messages are
preceded by an asterisk.
•
Line 4. This line displays messages that originate at the
System Controller.
The sample tray located on top of the printer receives output such as
transparencies, sample prints or system files, and waste sheets that
cannot be sent to the purge tray. The sample tray should be
monitored and emptied when it contains 100 sheets, although no
notification is given when the tray is full.
An Attention light is mounted on top of the inverter module. This light
either blinks or modulates (alternately brightens and dims) when the
printer requires operator attention. The light has three states:
•
Off — No printer problems exist that require attention.
•
Steady light — A situation exists that needs attention soon
(such as a low dry ink condition).
•
Flashing — The printer has stopped and requires your
attention immediately.
Note: When the Attention light starts flashing, an explanatory
message appears on the printer control console display. A similar
message appears in the IPS Print Engine Monitor window on the
Printer Controller screen.
The purge tray is located on top of the feeder/stacker module.
Aborted sheets (for example, damaged sheets or sheets cleared
after a paper jam) are sent to this tray. The purge tray should be
emptied when it has received 100 sheets of paper, although the
printer does not notify you when the tray is full.
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE