Advanced Tv Control - Zenith B25A10Z Service Manuallines

Notes:
•
When the channel label is selected (see 1-20 for
labels), then the Auto channel label is activated,
in other words, the program automatically takes
the channel label of the signal that is send by
broadcasting through the XDS service.
•
If the label None is selected, the Auto channel label
is deactivated.

ADVANCED TV CONTROL

This Special Features line allows entry into the Parental
Control Menu.
Advanced
TV Control
Aux Block
MPAA
Age Control
Content Block
Set Hours
Set Password
Lock On/Off
To Block or Unblock the current channel , press the Left/
Right Arrow key.
To change the channel while Blocking or Unblocking
channels, use the Channel Up/Down keys, or press the
desired channel digits, followed by ENTER.
(If Channel Up/Down is pressed, the next or previous
channel which was marked 'Added' will appear.)
AUXILIARY BLOCK
To Block or Unblock the sources, press the Left/Right
Arrow key.
The SOURCE key may be used to view the video source.
MPAA
The MPAA selector allows the customer to select either
to have the channel Unblocked, From G, From PG, From
PG-13, From R, From NC-17, or X.
AGE BLOCK
Use the Left/Right Arrow keys to select the Age Block
Menu.
To block channels for a general age, select either:
Unblocked, TV-G, TV-PG, TV-14 or TV-MA.
CM151
USER MENUS 221-1385 (Continued)
Parental Control
CONTENT BLOCK
Use the Left/Right Arrow keys to select the Content
Block Menu.
To block the dialog, use the Left/Right Arrow keys to
select either: Unblocked, TV-PG or TV-14.
Content Block
Dialog
Language
Sex Scenes
Violence
F Violence
No Content
To block the dialog, use the Left/Right Arrow keys to
select either: Unblocked, TV-PG,TV-14, or TV-MA.
SEX SCENES
To block the Sex Scenes, use the Left/Right Arrow keys
to select either: Unblocked, TV-PG,TV-14, or TV-MA.
To block the Violence, use the Left/Right Arrow keys to
select either: Unblocked, TV-PG,TV-14, or TV-MA.
SET HOURS
Use the Left/Right Arrow keys to adjust the number of
hours the Parental Control feature will be active. The
valid hour range is 1 to 99.
SET PASSWORD
Press the Left/Right Arrow key to allow Password entry.
The software accepts four-digit codes only. A password
must be entered by the customer.
After a four-digit code has been entered, the software
requires the customer to reenter the same four-digit
code.
If an invalid code is entered, or the two codes do not
match, an error message ("Not Accepted!") will appear.
This error message also appears when no code is entered
for the password or if only one digit is entered and no
other digit has been entered.
1-17
Unblocked
CA - 1385 MENUS