Memorex MVD2256 Owner's Manual page 47

TV/DVD/AV SELECTION
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing the TV/DVD/AV button.
Press the TV/DVD/AV button repeatedly to select the desired mode.
"DVD", "AUX1" or "AUX2" will display on the screen for 4 seconds.
TV DVD
1. To connect the TV/DVD to a VCR
Press the TV/DVD/AV selector button to select the AV mode to use the TV as a monitor.
Operate your VCR as usual.
2. To connect the TV to a TV Game
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of
different types of signal generated by these devices and subsequent hook-up variations required, they have not all
been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual
for additional information.
3. To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder
AUX 1 AUX 2
(Back) (Front)
VCR
To Audio/Video
OUT
AUDIO IN (L)
AUDIO IN (R)
To Audio/Video OUT
Audio/Video cord (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
NOTE:
When the unit is in DVD or AV mode,
and with no signal input to the unit
through AV jack, the TV screen
shows completely dark as if the unit
is powered off. Make sure to turn off
the unit, unless you want to enjoy
DVD playback.
Rear of TV/DVD
Front of TV/DVD
VIDEO IN
Front of TV/DVD
VIDEO IN
VIDEO IN
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)
47