Remote Management - ActionTec 1524 User Manual

Actiontec Wireless-Ready DSL Gateway User Manual

Remote Management

Selecting Remote Management in the "Advanced Configuration" screen generates
the "Remote Management" screen. Remote Management allows access to the
Gateway through the Internet via another computer. Actiontec recommends leav-
ing the Remote Management Off (the factory default setting).
To access the Gateway from the Internet, activate Remote Management by selecting
On and writing down the
On a computer outside of the network, open a Web browser and enter the
Gateway's address in the address text box. The Gateway's Main Menu (or a
WAN IP
password prompt, if a password has been set) appears in the browser window.
Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, go to the Setup screen
and select Change Admin Password. Follow the instructions in
the subsequent screens
address of the Gateway (see "
WAN IP
58
Address").
WAN IP