Connect Cables and Install DIMM
1. Connect the 8-pin cable to the server board. See letter "A" in Figure 10.
2. Connect the 24-pin cable to the server board. See letter "B" in Figure 10.
3. Connect the 5-pin cable to the server board. See letter "C" in Figure 10.
4. Position the DIMM above the socket. Align the two small notches in the bottom edge of the
DIMM with the keys in the socket. See letter "D" in Figure 10.
5. Insert the bottom edge of the DIMM into the socket.
6. Push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the
clips are firmly in place. See letter "E" in Figure 10.
®
Intel
Storage System SSR316MJ2 Power Distribution Module
Figure 10. Connecting Cables and Installing DIMM
TP01883
17