Install New Power Distribution Module
1. Position the new power distribution module near the installation location in the system. See
letter "A" in Figure 9.
2. Press down on the lever at the front of the power distribution module. While holding the lever
down, slide the new power distribution module into place. Ensure that the power distribution
module snaps into its seated position. See letter "C" in Figure 9.
3. Insert new plastic cable ties through the two steel links on the side of the chassis. Wrap the
plastic cable ties around the power distribution cables and pull the ties tight around the cables.
See letter "B" in Figure 9.
16
B
Figure 9. Installing the Power Distribution Module
®
Intel
A
C
Storage System SSR316MJ2 Power Distribution Module