Disconnect Cables and Remove Power Distribution
Module
1. Disconnect the 8-pin cable from the server board. See letter "A" in Figure 8.
2. Disconnect the 24-pin cable from the server board. See letter "B" in Figure 8.
3. Disconnect the 5-pin cable from the server board. See letter "C" in Figure 8.
4. Press down on the lever at the front of the power distribution module. While holding the lever
down, remove the power distribution module from the system. See letter "D" in Figure 8.
®
Intel
Storage System SSR316MJ2 Power Distribution Module
Figure 8. Remove Power Distribution Module from System
15